![background image](http://html1.mh-extra.com/html/bandelin/trison-3000-l/trison-3000-l_project-planning-instructions-installation-instructions_470785018.webp)
TB 4000
NW 3000
A
B
C
D
E
G
T
3
000
M
-C
TE 3000
to the Twist
F
18 / 25
61279e GB/2018-03
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
8
Connection of the ultrasonic bath
Set up the connections in the following sequence:
• Plug the compressed air connector (A) into an already-existing socket on site.
• Connect the power supply (C) for the TRISON Base to the mains supply switch and
secure by screwing them together.
• Connect the HF plug (E) for the ultrasonic oscillating tank to the HF generator and
secure by screwing them together. If necessarry remove short-circuit bridge from the
HF plug.
• Connect the mains power supply (D) for the HF generator to the mains supply
switch.
• Plug the main power supply (B) for the complete unit into the grounded socket outlet
only when all this is done.
• For using the TRISON Ethernet interface (F), always use the supplied ethernet
connector, the normally plug does not provide suf
fi
cient protection against possible
water penetration. For this, cut off the existing plug of the network cable and fasten
the supplied connector according to the enclosed instructions.
Содержание TRISON 3000 L
Страница 23: ......