B&D Controll-A-Door P Diamond SDO-2v2, Инструкция по эксплуатации

Страница: 9 / 38

Kit Contents
Powerhead Unit (Fig. 02)
1 x Controll-A-Door ® P Diamond powerhead
1 x Transmitter pack
(Pack includes two keyring transmitters and batteries)
1 x Wall mount transmitter with battery
2 x Door attachment arms
1 x Accessory and hardware pack
1 x Installation Manual
Single Piece C-Rail with Pre-Assembled Chain
(Fig. 03)
NOTE: Chain in one piece rail has been tensioned by the
factory. Do not adjust the tension of the chain.
IMPORTANT NOTE: If a modi fi cation to the length of the
track is required, the adjustment must be made from the
powerhead end only.
Single Piece C-Rail with
Pre-Assembled Timing Belt (Fig. 04)
Note: timing belt in one piece rail has been tensioned by
the factory. Do not adjust the tension of the timing belt.
IMPORTANT NOTE: If modi fi cation to the track length is
required, adjustment must be made only from powerhead
end.
Fig. 02
Fig. 04
Fig. 03
OR
PLUS
Diamond PD Power Drive : Instruction Manual
© Copyright 2012 B&D Doors
9 Controll-A-Door ® P Diamond SDO-2v2
Instruction Manual