Ballymore SM0114113, Руководство оператора

Страница: 56 / 72

OPERATOR
’S MANUAL
with Maintenance Information
Maintenance
51
B-8
Test the Drive Speed - Stowed
Position
BALLYMORE/ DINGLI requires that this
procedure be performed every 250 hours or
quarterly, whichever comes first.
Proper drive functions are essential to safe
machine operation. The drive function should
respond quickly and smoothly to operator
control. Drive performance should also be free
of hesitation, jerking and unusual noise over
the entire proportionally controlled speed
range.
Perform this procedure with the machine on a
firm, level surface that is free of obstructions.
1 Create start and finish lines by marking
two lines on the ground 40 ft / 12.2 m
apart.
2 Turn the key switch to platform control and
turn the red Emergency Stop button
clockwise to the on position at both the
ground and platform controls.
3 Lower the platform to the stowed position.
4 Press the drive function select button.
5 Choose a point on the machine; i.e.,
contact patch of a tire, as a visual
reference for use when crossing the start
and finish lines.
6 Bring the machine to top drive speed
before reaching the start line. Begin timing
when your reference point on the machine
crosses the start line.
7 Continue at full speed and note the time
when your reference point on the machine
passes over the finish line. Refer to
specifications.
B-9
Test the Drive Speed - Raised
Position
BALLYMORE/ DINGLI requires that this
procedure be performed every 250 hours or
quarterly, whichever comes first.
Proper drive functions are essential to safe
machine operation. The drive function should
respond quickly and smoothly to operator
control. Drive performance should also be free
of hesitation, jerking and unusual noise over
the entire proportionally controlled speed
range.
Perform this procedure with the machine on a
firm, level surface that is free of obstructions.
1 Create start and finish lines by marking
two lines on the ground 40 ft / 12.2 m
apart.
2 Turn the key switch to platform control and
turn the red Emergency Stop button
clockwise to the on position at both the
ground and platform controls.
3 Press the lift function select button.
a b
a lift function select button
b drive function select button