Ballymore SM0114113, Руководство оператора

Страница: 28 / 72

OPERATOR
’S MANUAL
with Maintenance Information
Function Tests
23
raised exceeds 0.72 ft per second / 22
cm/s, immediately tag and remove the
machine from service.
Test the Tilt Sensor Operation
Note: Perform this test from the ground with
the platform controller. Do not stand in the
platform.
37 Fully lower the platform.
38 Place a 2.0×7.9 in / 5×20 cm or similar
piece of wood under both wheels on one
side and drive the machine up onto them.
39 Raise the platform at least 6.6 ft / 2 m.
⊙
Result: The platform should stop and the tilt
alarm will sound at 150 beeps per minute.
40 Lower the platform and drive the machine
off the block.
Test the Pothole Guards
Note: The pothole guards should automatically
deploy when the platform is raised. The
pothole guards activate another limit switch
which allows the machine to continue to
function. If the pothole guards do not deploy,
an alarm sounds and the machine will not
drive.
41 Raise the platform.
⊙
Result: When the platform is raised 6.6 ft /
2 m from the ground, the pothole guards
should deploy.
42 Press on the pothole guards on one side,
and then the other.
⊙
Result: The pothole guards should not
move.
43 Lower the platform.
⊙
Result: The pothole guards should return to
the stowed position.
44 Place a 2.0×7.9 in / 5×20 cm or similar
piece of wood under a pothole guard.
Raise the platform.
⊙
Result: Before the platform is raised 6.6 ft /
2 m from the ground, an alarm should
sound and the drive function should not
Work.
45 Lower the platform and remove the
2.0×7.9 in / 5×20 cm wood block.