Balluff BIP LD2-T017-01-EP-S4 Series, Руководство пользователя

Страница: 60 / 212

The technical data, in particular the repeat accuracy,
applies after a warm-up period of 15 min.
7.1 Accuracy
Linearity range S
l
0…17 mm
Linearity error ≤ ±250 µm
Effective distance S
e
8.5 mm
Repeat accuracy ±50 µm
7.2 Ambient conditions
Ambient temperature T
a
–25…+70 °C
Storage temperature −40…+85 °C
Temperature drift max. of full scale ±3 %
Vibration
per EN 60068-2-6
55 Hz, 1 mm
amplitude,
3 × 30 min
Degree of protection per IEC 60529 IP67
Shock rating
per EN 60068-2-27
30 g/11 ms
Contamination scale 3
7.3 Power supply
Operating voltage U
B
, stabilized
2)
18...30 V DC
Rated operating voltage U
e
24 V DC
No-load current I
0
at U
e
≤ 20 mA
Residual ripple ≤ 10 % (of U
e
)
Rated insulation voltage U
i
75 V DC
Mains rated frequency DC
Short-circuit protection yes
Protection against device mix-ups yes
Reverse polarity protection yes
1)
7.4 IO-Link interface
Specification IO-Link 1.1
Transfer rate 38.4 kBaud (COM2)
Process data 4 bytes
Position value at S
l min
0 µm
Position value at S
l max
17000 µm
Data format 16 bit signed integer
Cycle time ≥ 3 ms
Master-device process data 0 bytes
Device-master process data 4 bytes
7.5 Mechanical data
Housing material PA
Active surface material PA
Connection type Cable without/with
connector
Tightening torque 0.5 Nm
Cable coating material PUR
Cable diameter ≤ 3.5 mm
Cable, number of wires 3
Wire cross-section 0.14 mm 2
Bending radius, fixed routing ≥ 3 × cable diameter
1) For UL: Use in enclosed spaces and up to a height of 2000 m above sea
level.
2) For UL: The BIP must be connected externally to a power-limited circuit
according to UL 61010-1 or a power source of limited output according
to UL 60950-1 or a power supply with Protection Class 2 according to UL
1310 and UL 1585.
7
Technical data
28 english
BIP LD2-T017-01-EP _ _ / EP _ _ -S4
Inductive Positioning System