1
28
13
~199.7
~27
~20.9
~23.9
16.5
5
M4 (2x)
M5
M3
a
~20.9
~23.9
b
c
d
~199.7
e
f
g h
english
BAM GM-ML-01-C04
Slide/Slide Rail - Guided Magnetic Tape Position Measuring System
Intended use
A position measuring system is composed of a slide
combined with a sensor head (e.g. BML-S1G0-...) and a
slide rail with magnetic tape. The system is installed on a
flat surface in a machine or installation and connected to
the moving machine part by a guide arm. Flawless function
in accordance with the specifications in the technical data
is ensured only when using original BALLUFF accessories.
Use of any other components will void the warranty.
The information in these instructions must be observed,
particularly information related to installation. Improper use
will result in the loss of warranty and liability claims against
the manufacturer.
Download further user's guides
A complete user's guide can be downloaded from the
Internet at
www.balluff.com/downloads-bml
or
requested via e-mail from
.
Construction and function
The slide, in which the sensor head is mounted, is
connected via a guide arm to the machine part whose travel
is to be measured.
The slide is guided along the slide rail. During this process,
the sensor head measures the travel.
General safety notes
Installation
and
startup
may only be performed by
trained specialists.
The
operator
is responsible for ensuring that local safety
regulations are observed. In particular, the operator must
take steps to ensure that a defect in the linear encoder
system will not result in hazards to persons or equipment.
If defects and unresolvable faults occur in the system, take
it out of service and secure against unauthorized use.
BAM GM-ML-01-C04 slide
Legend: a = slide rail; b = magnetic tape with/without cover strip; c = mounting holes for drag chain; d = connector; e = slide; f = sensor head;
g = lugs; h = fixing for joint rod
System components
:
– Slide
BAM GM-ML-01-C04
– Slide rail
BML-R01-M_ _ _
– Magnetic tape BML-M02-A55-A_-M_ _ _ _-E
(with/without cover strip)
– Sensor head BML-S1G0-…
Accessories
– Lugs
BML-Z0008
– Joint rod
BTL2-GS10-_ _ _ _ -A
– Installation aid BML-Z0010
Left
Right
Rear
Fr
ont
Direction of travel
