Ballu BOGH-15, Руководство по эксплуатации

Страница: 21 / 24

21
ignition circuit BOGH-15E
ignition circuit BOGH-15
gas leakage protection circuit BOGH-15, BOGH-15E
G1
S1
SQ1
control
unit
BQ1
GB3 GB2
SA1
GB1
1.5V
BQ1
11. Transportation and storage
IMPORTANT!
Never store the appliance with
one or more gas cylinders.
If the heater is not used for a
long time (seasons or for other
reasons), follow the instructions
below:
• You can store the device in both
assembled and disassembled
transport.
• Store the device in a dry place,
protected from possible damage.
• Always close the burner box
and base to avoid spider webs,
dust, etc.
• After long-term storage, it is
necessary to inspect the device
for damage and completeness,
as well as to clean the device
from dust
12. Scope of supply
- Glass flask in individual packaging;
- The average base of the gas heater in
assembly with a control unit;
- The lower base of the gas heater;
- Afterburner assembly with visor racks;
- collapsible visor
- Removable side cover;
- Non-removable side cover (2 pcs.);
- Top profile (3 pcs.);
- Protective grille (3 pcs.);
- The top bar for the grille (3 pcs.);
- Screw M4 (24 pcs.), Screw M4 with
countersunk head (4 pcs.) Are pre-twisted in the
mounting holes;
- AA battery (only for BOGH-15 model);
- Butterfly nut M6 (3 pcs.);
- Battery type AAA (2 pcs.) (Only for the model
BOGH-15E);
- Battery type D (LR20) (2 pcs.) (Only for model
BOGH-15E);
- Chain in lavsan winding with two carbines for
fixing the gas cylinder;
-Operation manual;
- Packaging.
13. The electrical schematic diagram
of the model BOGH-15, BOGH-15E
Fig.24 - Electrical schematic diagram
GB2, GB3 - battery 1,5V (type D (LR20));
GB1 - battery 1,5V (type AA);
BQ1 - ignition electrode;
G1 - safety valve;
S1 - thermocouple;
SQ1 - tipping sensor;
SA1 - piezoelectric igniter.