Ballu BOGH-15, Руководство по эксплуатации

Страница: 19 / 24

19
9. Maintenance
IMPORTANT!
• Before performing any
maintenance operations, make
sure that the gas supply valve is
closed.
• To clean the inside of the glass
tube, use a dry soft cloth.
• Use of cleaning products can
also cause smudges and stains
that will be difficult to remove.
• Periodically check the integrity
of the gearbox and hose (once a
week and every time you replace
the gas cylinder. If cracks, chips
or other damage are found,
replace the hose with a new one
of the same length and the same
type). For replacement, use only
spare parts made at the heater
factory.
• Periodically check the visor of
the gas infrared lamp for soot
and soot. Clean the visor at least
1 time per week.
IMPORTANT!
• For safety reasons, the gas
cylinder can be refilled by no
more than 85%. That is, a 12-liter
gas cylinder cannot be refilled
for more than 11 liters. and in
a cylinder of 27 liters. not more
than 23 liters.
IMPORTANT!
• It is recommended to store
refilled cylinders at a temperature
of not less than + 5 ° С and not
more than + 20 ° С.
Pressure regulator
Before using the heater for the first time, it is
necessary to check the degree of tightening of
the hose clamps, and tighten if necessary.
Damage to the glass flask
• The technical features of the flask are designed
to resist thermal shock caused by normal
temperature fluctuations, rain or humidity.
• Despite the choice of this material (Borosilicate
or Quartz), flask damage may occur as a result
of special weather conditions and / or excessive
temperature fluctuations.
IMPORTANT!
Damage to the flask (crack) is not
dangerous to people or objects
in the immediate vicinity of the
heater.
IMPORTANT!
Damage to the flask does not
interfere with the operation of the
heater in the short term, but the
flask should be replaced to ensure
the normal operation of the heater.