Baldwin Boxall C2CB4, Руководство по установке

Страница: 56 / 93

Care2
Installation Instructions
Care2 issue 7
47
7. Scroll up to the “Auto Assign” option.
Figure 4.15 — Selecting Auto Assign Option
8. Select “Auto Assign” and the following warning will be
displayed.
Figure 4.16 — Auto Assign Data Modification warning
Press the Encoder to initiate the “Auto Assign” process.
The Console will then interrogate each line in turn.
If a new Outstation is found the Console will store the data
in the Line Parameters menu.
If a previously detected Outstation is not found then the
(Manually Selected) Auto Assign process will replace the
outstation type with “N/A”.
N
OTE
: The Auto Assign procedure can only be initiated on the Local
Console.
N
OTE
: At any time it is possible to "Escape" to the Exit Entry in the
current menu by Pressing and Holding the Encoder.
This "Long Press" will cancel the Auto Assign process.
www.acornfiresecurity.com
www.acornfiresecurity.com