Baldwin Boxall C2CB4, Руководство по установке

Страница: 23 / 93

Care2
Installation Instructions
14
Care2 issue 7
Figure 2.5 — Internal View - Undo Loom Securing screw
6. Fit the New C2CEK4 Line Card next to the first card using
the M4x8 screws as shown in Figure 2.6.
Figure 2.6 — New C2CEK4 Line Card Fitted
7. Disconnect the BLUE RJ45 “Uplink” cable from the first Line
Card and connect the BLUE RJ45 cable to the “Uplink”
connection on the new Line Card as shown in Figure 2.7.
8. Fit the Red Link Cable between the “Uplink” connector on
the original Line Card and the “Downlink” connector on the
new Line Card.
Figure 2.7 — New C2CEK4 Line Card Installed and Connected
The New Line Card is now installed and ready for connection
to the Site Cabling (shown in Figure 2.2).
www.acornfiresecurity.com
www.acornfiresecurity.com