BVRD Network
Installation Instructions
BVRDNET issue 3
5
Figure 2.3 — Typical Connection Details for BVRDCIF Copper Network
For each BVRD2M/4 there are two BVRDCIF modules. The
RJ45 connections should be connected as shown in Figure 2.3,
with one RJ45 in the “Lower” (P3) socket and the other RJ45 in
the “Upper” (P2) socket of the BVRDCIF modules.
N
OTE
: The "Tx" and "Rx" pairs are swapped between the two RJ45
sockets (P2 and P3) on the BVRDCIF. This enables all Site Network
Cables to be terminated on the BVRDCIF modules using the same colour
scheme to enable quick and easy connection.
