BVRD Network
Installation Instructions
12
BVRDNET issue 3
3.4 S
YSTEM
W
IDE
R
ESET
C
ONTROL
The BVRD Network Card includes a facility to remotely reset the
local router.
During Commissioning it is occasionally necessary to reset
routers to clear stored routes, and this can be difficult when
physical access to the equipment racks is limited.
It is possible to connect each reset seperately for individual
routers, or all routers on the network can have these reset
connections connected together to enable a system wide reset.
Figure 3.2 — Typical Connections for System Wide Reset
W
ARNING
The switch shown in Figure 3.1 must be either a momentary "Flip-
top" or keyswitch to prevent accidental or inadvertant use.
Using this reset will temporarily prevent the system from
operating correctly.
!
