Baldor NextMove PCI, Руководство по установке

Страница: 83 / 92

Accessories A-1 MN1903
A.1 Introduction
NextMove PCI is supplied with a software license to control 1, 2 ,3, 4 or 8 axes. Similarly, the
NextMove PCI Expansion Card is supplied with a software license to control a further 4 or 8
axes. A license cannot be upgraded.
A.1.1 NextMove PCI Expansion card
The NextMove PCI Expansion Card is available in 4 or 8 axis variants and provides an
additional 20 digital inputs, 12 digital outputs, 4 analog inputs, 4 analog outputs (drive
command outputs) and a relay. However, there are no CAN functions. The electrical
specification of the I/O is the same as the main NextMove PCI card. The card requires its own
additional breakout module and 100-pin cable.
NextMove PCI supports either one or two expansion cards. Connection to the cards is made
through a bridging PCB (the expansion interconnect) that connects across the top of the
cards.
Figure 17 - NextMove PCI Expansion card
Note: If two expansion cards are used then the dual interconnect board is needed. It is
advisable to exert a retaining force on the interconnect board, to prevent it working
loose due to vibration.
A
Accessories
A