32
6. SETTING THE VOLTAGE SELECT SWITCH
WARNING! READ ALL SAFETY NOTICES BEFORE ATTEMPTING TO OPERATE THE CONTROL
OR SEVERE INJURY OR DEATH CAN RESULT. FAILURE TO FOLLOW THE
WARNINGS AND CAUTIONS, MAY RESULT IN ELECTRIC SHOCK, FIRE OR
EXPLOSION.
The Voltage Select Switch is located under the cover and must be set before applying power to the control.
See Figure 6-1.
6.1 For 208/230 Volt AC Line Input
Set the Voltage Select Switch to the “230” position (factory setting). The switch toggle should be in the
lower position with “230” displayed at the top.
6.2 For 115 Volt AC Line Input
Set the Voltage Select Switch to the “115” position. The switch toggle should be in the upper position
with “115” displayed at the bottom.
Figure 6-1 Voltage Select Switch Setting
208/230 Volt AC Line Input
(Factory Setting)
115 Volt AC Line Input
