11
1.1 Standard Features
Table 1-1 outlines the Standard Features for the BC140 / BC140-FBR Control.
Table 1-1 Standard Features
Feature
Description
Simple to Operate
Does not require programming. Uses adjustable trimpots which are factory
set for most applications.
AC Line Input Voltage
(±15%, 50/60 Hz)
115 and 208/230 Volts AC
Dual Voltage Selection
(Under the Front Cover)
Allows for selection of 115 Volt or 208/230 Volt AC line input. (Factory set to
the "230" Volt position.)
Plug-In Horsepower
Resistor
®
(Supplied
Separately)*
Allows the control to be used on a wide range of motors.
Fusing*
Built-In AC Line Fuse. Armature Fuse (Supplied Separately).
MOV Protection
AC line input transient suppression.
Adjustable Trimpots
Allow adjustment of Acceleration (ACCEL), Deceleration (DECEL),
Minimum Speed (MIN), Maximum Speed (MAX), Current Limit (CL), and IR
Compensation (IR).
Diagnostic LEDs
Power On (PWR ON) and Current Limit (CL).
*
Plug-In Horsepower Resistor® and armature fuse must be properly selected to accurately calibrate the
control.
