Baldan CRSG 32, Инструкция по эксплуатации

Страница: 19 / 50

Instruction Manual
17 - CRSG / CRI / CRI-R
10 - Lift a part of the grid (front or rear), place the set of discs in line,
observing their arrangement in figure 5. Match the holes in the
shoes with those in the bearings and assemble using the screws
item 5 figure 5.
11 - Lift the other part of the harrow and repeat the operation on the
side, checking that the concavity of the discs in one section must
be opposite to the other.
Figure 5
5
5
10 mm
6
Figure 7
Figure 6
12 - When assembling the frame with the disc sections, observe that
the bearing support (shoe) must face the concavity of the discs, as
shown in figure 6.
13 - When fixing the wipers item 6, they must be 5 to 10 mm away
from the disc, as shown in figure 7.