Baldan CRSG 32, Инструкция по эксплуатации

Страница: 28 / 50

CRSG / CRI / CRI-R - 26 27 - CRSG / CRI / CRI-R
Instruction Manual
DISK HARROW GANGS ADJUSTMENTS
Decrease the
angling for disking
Increasing the
angling for disking
Figure 17
DISPLACEMENT ADJUSTMENT
Availables only for CRSG-L /
CRI-R- 12 / 14 and 16 Discs)
Lateral Displacement
1
Figure 18
01 - The following adjustments can be made for a better disk blade
penetration. In certain soil conditions, less penetration on gangs
may occur, to avoid it adjust the angle of the disc.
02 -
To increase or decrease the angle of the disc remove the bolts
from the frame and adjust to the desired position.
03 - The ground wheel helps on the depth control.
- Nor hard ground conditions, or when more penetration is desired
increase the angling of the discs as illustrated on the figure 17.
- For normal ground conditions decrease the angling for disking.
01 - This displacement must be adjusted when the harrow is not giving a perfect
finish, that is, leaving a trace of the tractor. The harrow must work centered
with the tractor’s traction line, to do so, move the upper and lower plates
item 1 figure 18 of the header to the right or left as shown in figure 18.
02 - The hitch header works in the center hole of the
top and bottom plates for medium soils; moving
it to the other holes changes the angle of attack of
the front section, only for CRSG/CRI/CRI-R with 12,
14 and 16 discs.