Baldan CRSG 32, Инструкция по эксплуатации

Страница: 24 / 50

CRSG / CRI / CRI-R - 22 23 - CRSG / CRI / CRI-R
Instruction Manual
HITCHING TO THE TRACTOR (CRI 44 DISCS) - PART I
The
CRI 44 discs
can be optionally purchased with header with traction chain; To attach it to the tractor drawbar, proceed as follows:
01 - Slowly approach the tractor to CRI 44 discs in reverse gear, paying attention to applying the brakes. Then, turn off the tractor engine,
relieve the control pressure by activating the lever a few times and check if the couplings are clean, if not, clean them.
02 - Then, release the chain (1) from point
“A”
through the pin (2) and lock (3), figures 12.
03 - Then, articulate the shackle (4) and fix the chain (1) through the pin (2) and latch (3) at one of the points “B” so as to keep the shank (4)
parallel to the hitch header (5) .
2
“A”
“B”
1
3
5
4
1
2
3
Figures 12