Baldan CRSG 32, Инструкция по эксплуатации

Страница: 34 / 50

CRSG / CRI / CRI-R - 32 33 - CRSG / CRI / CRI-R
Instruction Manual
09. BEARING ADJUSTMENTS
10. CLEANING
•
When the bearings present looseness, adjust them on the following
way:
01 - Take the washer out item 1 figure 22.
02 - Release the bolts item 2 and take the lid item 3 out.
03 - Take the joints 1 or 2 item 4, out of the lid bearing. Put it again
and tighten it.
04 - If the looseness is still, turn the lid item 3, to increase the adjustment
after assemble the lid on the bearing with as many joints as it is
necessary.
05 - The bearing should turn freely, that is, without radial and axial
looseness.
Don’t assemble the bearing without a joint.
01 - When the grade remains inactive for a long period, make a
general cleaning, check if the painting didn’t get sp oiled. If it
happened, pass a protecting oil and lubricate it totally. Check
the discs, repaint them and pass a protecting oil on them.
4
3
2
1
3
2
4
Figure 22
NOTE