Balcrank 3331-018, Руководство по эксплуатации, установке, обслуживанию и ремонту

Страница: 16 / 26

Change Scale Factor
Changing the Scale Factor changes the accuracy of the meter, potentially causing it to
overfill or under fill. This has the potential to cause a mechanical breakdown.
Scale Factor Digits
Scale Factor Display
1. Press the button to advance through the
Scale Factor digits.
2. Press the button to change the selected
number.
NOTE:
All digits can be scrolled between 0 and 9
except the first. It can only be scrolled from 0 to 1
or from 1 to 0.
3. Press the button to advance to the next number in Scale Factor.
4. Repeat steps 2 and 3 for all five digits in Scale Factor.
Save Changes
When you are finished programming these options, turn the unit over and press the
PROGRAMMING
key.
1. Hold the PROGRAMMING key until the display flashes three times and goes blank.
2. Press the button to turn the meter display on.
Verify Changes
1. Verify Unit of Measure is correct.
2. Push and hold the button and button together, to verify that the Scale Factor
is correct.
12
Changing the Unit of Measurement from metric to English or from English to metric
clears the Re-settable Total and Accumulated Total.
4. If L, (Liters), is selected, the decimal point begins to flash.
• You now have the option to change the decimal point to either a period or a comma.
• To do this, press the button.
5. If no Scale Factor changes are necessary, refer to the Save Changes section of this
manual.