METER OPERATION, EPM MODE
The meter can be put in EPM Mode for start up purposes. Refer to the Supervisor’s Instruc-
tion Manual for key sequence.
The AUTO icon displays, indicating the meter is in the EPM Mode. The solenoid valve
unlocks and the meter can now be used as a Standard Preset Batch Meter.
NOTE:
The keypad AUTO button is used to toggle between Manual Mode and Batch Mode.
Manual Mode
EPM Manual Mode
Batch Mode
EPM Batch Mode
1. Pull the trigger to begin the flow.
2. The display shows the amount dispensed.
3. When the desired amount has been dispensed,
release the trigger to stop the flow.
4. Press button once to reset the counter
display to zero.
To enter the Batch Mode from the Manual Mode
press the meter button. The screen on the left
appears. When in the Batch Mode, the batch quan-
tity displays in the lower, right hand corner of the
screen.
The meter is now in Batch Mode.
1. Change the batch size by pressing the , and/or buttons.
a) Press the 10 button to increase the batch amount in increments of 10 units.
b) Press the 1 button to increase the batch amount in increments of 1 unit.
c) Press the 0.1 button to increase the batch amount in increments of 0.1 units.
7
Содержание 3331-018
Страница 22: ...ITEM PART DESCRIPTION 1 Battery Holder Assembly 2 Bottom Case with Screws 18...
Страница 23: ...1 2 3 ITEM PART DESCRIPTION 1 Rubber Boot 2 Display Assembly 3 RF Register Assembly Not Shown Swivel NPT 19...
Страница 24: ...1 2 3 ITEM PART DESCRIPTION 1 Valve Assembly 2 Gear Service Kit with O ring 3 Trigger Assembly 20...
