AFTER SALES SUPPORT
800-372-5715
USA
MODEL: AU160131 PRODUCT CODE: 11215 10/2019
AFTER SALES SUPPORT
800-372-5715
USA
MODEL: AU160131 PRODUCT CODE: 11215 10/2019
12
11
Operation instructions
Using the LED flashlight
1. Long press ON/OFF button for 3 seconds to turn on the light to mode (a)
2. Press ON/OFF button again to switch modes
a. Solid – Stays on
b. SOS – Slow, sporadic flashes
c. Strobe – Quick, consecutive flashes
d. Off
Jump start your car
Before you begin:
• This product is for 12V car (up to 6.0L gas or 4.0L diesel engine) only
• Check to make sure that 3 to 4 indicator lights are illuminated (battery level
is above 60%) before you use it to jump start your car
• Ensure the red & black clamps are not touching each other
1. Insert the jump start socket plug of the smart battery clamp completely into the
jump start power bank socket (figure 1). The socket and the socket plug are both
color coded blue. If the green and red-light indicators on the battery clamp are
flashing alternately, you are safe to move on to the next step
• Connect the red clamp to the positive terminal (+) of the car battery and
connect the black clamp to the negative terminal (-) of the car battery (figure
2). If the green and red-light indicators on the battery clamp are flashing
alternately, you are safe to move on to the next step.
Please note: ensure the red and black clamps never touch each other
Getting started and first use
Operation instructions
When using product for the first time, please make sure that the Jump Start Power
Bank is fully charged. To do this:
1. Unplug the rubber seal covering the USB ports
2. Use the included USB cable (Micro or Type C) and plug this into the corresponding
USB output port.
3. Then plug the standard USB end into a PC, Laptop or USB wall charger (not included)
Note: Indicator light meanings below:
• 1 LED Light on equals 25% battery
• 2 LED Lights on equals 50% battery
• 3 LED Lights on equals 75% battery
• 4 LED Lights on equals 100% battery
The safety precautions enclosed herein reduce the risk of fire, electric shock and
injury when correctly adhered to. Follow all instructions and take notice of all
warnings to reduce the risk of fire, electric shock or personal injury.
• The device shall be stored indoors and protected from the elements
• The unit shall not be charged outdoors
• When in use, steps should be taken to reduce the exposure to rain, sleet, snow,
and the like
Charge your USB device
1. Unplug the rubber seal covering the USB ports
2. Connect your USB chargeable device (i.e. Smart Phones or other electronic
devices) via USB cable
3. Plug the USB cable into the USB output port on the power bank
4. The LED lights will turn on automatically & your USB device will indicate charging
5. Unplug the cable when charging is complete
1
2
