6
Assembly of the Pizza Oven Box
Step 1. Carefully invert the housing (A) onto a clean, soft surface. Note: failure
to follow this instruction may result in scratches or dents on the pizza oven.
Step 2. Remove the STONE SUPPORTS (C) SCREW and WASHES
Step 3. Identify the TOP STONE (E), this is the largest stone in the box. NOTE:
there is one notch on each side of this stone.
Step 4. Gently fit the TOP STONE (E) into the HOUSING (A).
NOTE: The probe of the gauge will be centered in the hole in the top stone
once installed.
Step 5. Identify the REAR STONE (H). Fit the REAR STONE into the back of the
housing, behind the TOP STONE (E) and in front of the BACK PANEL (B).
Step 6. Identify the 2 SIDE STONES (G). Fit the 2 SIDE STONES into the notches
of the TOP STONE (E).
D
A
C
C
D
A
