10
Cylinder must be stored outdoors out of the reach of children and shall not be stored in a building,
garage, or any other enclosed area.
Only use this appliance outdoors in a well-ventilated area.
Never operate this appliance with 10 ft. (3.0m) of any structure, combustible material or other gas
cylinder.
Do not use this appliance under overhead combustible construction.
Do not place or use this appliance on a combustible surface.
This appliance becomes hot, do not place on any surface which cannot withstand high temperatures
without deforming or being damaged.
This appliance becomes hot, do not place on any surface which cannot withstand high temperature
without deforming or being damaged.
This appliance is not to be installed in or on boats or recreational vehicles.
Failure to follow these instructions could result in fire, explosion or burn hazard which could cause
property damage, personal injury or death.
LP Gas Leak Test
Before first use and after each time the LP gas cylinder is reconnected or changed the LP gas Leak
Test must be performed.
Do not use an open flame to check for leaks.
Do not smoke or be in the presence of any ignition sources while performing a leak test.
Perform leak test outdoors in a well-ventilated area.
Step 1. Prepare a soapy water solution of water and detergent.
Step 2. After connecting the appliance to the LP gas cylinder, slowly
open the valve completely [see Figure-3].
