Baker Hughes Druck PV 212, Инструкция по эксплуатации

Страница: 10 / 76

6 | PV 212 Instruction Manual-English © 2005 Baker Hughes, a GE company – All rights reserved.
5. General Specification
6. Returned Goods Procedure
If the unit requires calibration or is unserviceable, return it to the nearest GE Service Centre
listed at:
www.gemeasurement.com
Contact the Service Department to obtain a Return Authorization (Worldwide excluding
USA).
In the USA, obtain a Return Material Authorization [RMA].
Provide the following information on either a RGA or RMA:
• Product (i.e. PV 212)
• Serial number
• Details of defect/work to be undertaken
• Operating conditions
6.1 Safety Precautions
You must inform GE if the product has been in contact with any hazardous or toxic substance.
The relevant COSHH or in the USA, MSDS, references and precautions to be taken when
handling.
INFORMATION
Hydraulic fluids must be compatible with stainless
steel, anodized aluminum, nitrile rubber, PTFE, polypropylene, Delrin,
acrylic and nylon.
Item Specification
Hydraulic Pressure Range PV 212-22: 0 to 700 bar (0 to 10,000 psi)
PV 212-23: 0 to 1000 bar (0 to 15,000 psi)
Pressure Connections ¼” BSP parallel female
Recommended Hydraulic Fluids De-mineralized water or low viscosity mineral-based
hydraulic oil.
Dimensions (Length x Width x Depth) 230 mm (9.0”) x 160 mm (6.25”) x 70 mm (2.75”)
Weight (approximate) 1.45 kg (3.2 lb)
INFORMATION
Service by unauthorized sources will affect the
warranty and may not guarantee further performance.