background image

Tech Field Support & Warranty:

Phone: +1-866-827-5378

[email protected]

bakerhughes.com

Copyright 2020 Baker Hughes Company. All rights reserved. Baker Hughes provides this information on 
an “as is” basis for general information purposes. Baker Hughes does not make any representation as to 

the accuracy or completeness of the information and makes no warranties of any kind, specific, implied or 
oral, to the fullest extent permissible by law, including those of merchantability and fitness for a particular 

purpose or use. Baker Hughes hereby disclaims any and all liability for any direct, indirect, consequential or 

special damages, claims for lost profits, or third party claims arising from the use of the information, whether 

a claim is asserted in contract, tort, or otherwise. Baker Hughes reserves the right to make changes in 

specifications and features shown herein, or discontinue the product described at any time without notice or 

obligation. Contact your Baker Hughes representative for the most current information. The Baker Hughes 
logo, Consolidated, Green Tag, Eductor Tube Advantage, and Thermodisc are trademarks of Baker Hughes 
Company. Other company names and product names used in this document are the registered trademarks or 
trademarks of their respective owners.

BHCN-1900P-IOM-19556C-0320     03/2020

Direct Sales Office Locations

Find the nearest local Channel Partner in your area:

valves.bakerhughes.com/contact-us

valves.bakerhughes.com

Australia

Brisbane

Phone:   +61-7-3001-4319
Perth

Phone:   +61-8-6595-7018
Melbourne

Phone:   +61-3-8807-6002

Brazil

Phone: +55-19-2104-6900

China

Phone: +86-10-5738-8888

France

Courbevoie

Phone: +33-1-4904-9000

India

Mumbai

Phone: +91-22-8354790
New Delhi

Phone: +91-11-2-6164175

Italy

Phone: +39-081-7892-111

Japan

Tokyo 

Phone: +81-03-6871-9008

Korea

Phone: +82-2-2274-0748

Malaysia

Phone: +60-3-2161-03228

Mexico

Phone:   +52-55-3640-5060

Russia

Veliky Novgorod

Phone: +7-8162-55-7898
Moscow

Phone: +7-495-585-1276

Saudi Arabia

Phone: +966-3-341-0278

Singapore

Phone: +65-6861-6100

South Africa

Phone: +27-11-452-1550

South & Central 

America and the Caribbean

Phone:   +55-12-2134-1201

Spain

Phone:  +34-935-877-605  

United Arab Emirates

Phone: +971-4-8991-777

United Kingdom

Bracknell

Phone: +44-1344-460-500

United States

Houston, Texas

Phone: +1-713-966-3600

Содержание Consolidated 1900/P Series









































Отзывы: