Bajaj Auto Legend 00300728, Руководство по обслуживанию станции

Страница: 49 / 66

45
Removal of Big bushes (a) of Antidive kink
ANTIDIVE LINK ASSEMBLY:
l
Assemble ‘L’ type grease nipple at one end of link
and other type of grease nipple at other end of link
as shown in sketch.
Link assly.
l
Press big bushes using suitable punch from bearing
driver set (P.No. 37103061) and then assemble
small bushes, ‘O’ rings and cup washers on link.
FRONT BRAKE PANEL ASSEMBLY:
l
Using suitable punch from bearing driver set (P.
No.37 1030 61) punch Needle roller bearings into
Front Brake panel . Apply grease to Needle roller
bearings.
Refitting of Needle roller bearing
l
Using suitable punch from bearing driver set punch
Grease seal into Front brake panel.
Assembly of Grease seal
l
Assemble Grease nipple on Front brake panel.
l
Insert Front brake Actuating shaft assly into Front
brake panel.
l
Assemble ‘O’ ring & Indicator into Actuating shaft
and fit Actuating lever into Actuating shaft by Bolt
& Nut.
Assembly of Actuating lever (a)
l
Facing paint mark upward, assemble Front brake
shoe into Front brake panel. Fit spring lock. This is
done to have proper positioning of Leading and
Trailing Brake shoe.
l
Assemble Speedometer pinion alongwith support
into Front brake panel with screw. ‘O’ ring should be
fixed on support.
Assembly of Speedometer holder
a
Assemble grease nipple
(P.No.35 1710 33) on this hole
Assemble grease nipple
(P.No.23 1613 05) on this hole
a
Screw for
speedometer holder