Bajaj Auto Legend 00300728, Руководство по обслуживанию станции

Страница: 47 / 66

43
l
Remove circlip holding front brake panel on front
axle and then remove front brake panel .
Removal of Circlip for removing Front brake panel
a) Circlip
b) Washer
l
Remove front shock absorber upper mounting
bracket by removing 2 nuts .
Removal of Upper bracket (a) for Fr. shock absorber
l
Remove front shock absorber lower end bolt and
then take out front shock absorber .
Removal of Front shock absorber lower bolt (a)
l
Remove hub pin locking plate bolt and lock plate .
l
Remove hub pin alongwith shoulder washer and
take out front hub .
l
Using hook spanner (P.No. 37180101) unscrew
lock nut and upper bearing race. Take care to hold
steering column to avoid it from falling down.
Remove upper and lower steering ball cage.
Removal of Lock plate (a)
l
Tilt the scooter on one side and take out the steering
column carefully from the bottom side.
l
Give suitable support below floor board of chassis.
l
Using puller (P.No. 37180103) remove lower bear-
ing race from fork. Remove top bearing race by
special tool (P.No.37180506).
l
Remove the front mudguard by removing two bolts.
Removal of Front mudguard
l
Remove grease nipple provided at cross tube of
steering column.
FRONT BRAKE DRUM DISMANTLING:
l
Remove speedometer gear and spacer from front
brake drum by using Extractor ( P. No. 37151905)
which is to be used along with 37100114.
Removal of Speedometer gear
b
a
a
a
a