Baja motorsports AT250UT, Руководство оператора

Страница: 7 / 64

7 — English
WARNING LOAD LIMIT
30 kg (66 lbs.) NEVER sit here
989000003-01
SAFETY LABELS
N
1
2
3
4
5
DRIVE SELECT LEVER
GEAR SHIFT PATTERN
Read operator’s manual
carefully before operating.
ATV MUST be stopped and
in first gear before shifting
the drive select lever into
or from reverse.
989000004-01
WARNING
Shifting into or from reverse can only be
done in first gear.
You must come to a complete stop before
shifting into or from reverse.
989000005-01
WARNING
Improper tire pressure or
overloading can cause loss of control.
Loss of control can result
in serious injury or death.
COLD TIRE PRESSURE:
Recommended:
Minimum front: 2.5 psi (17.0 kPa)
Maximum front: 5.0 psi (34.5 kPa)
Minimum rear: 3.2 psi (22 kPa)
Maximum rear: 5.0 psi (34.5 kPa)
Never set tire pressure below the recommended
level. It could cause the tire to dislodge from the rim.
LOADING:
Maximum vehicle capacity is: 364 lbs. (165 kg)
Maximum capacity includes the weight of the operator,
cargo, and accessories.
989000006-01
CAUTION
•
Accessories connected to utility socket should not
exceed 100 watts.
•
Make sure accessories are firmly plugged in utility
socket before use.
•
Using utility sockets for more than 10 minutes
without engine running will drain battery.
989000007-01
This vehicle is an all-terrain
vehicle and is not intended for
use on public highways.
Ce vehicule est un vehicule
tout-terrain qui n’est pas
destiné à etre utilise sur les
voies publiques.
WARNING
AVERTISSEMENT
989000019-01
4
5
6
7
8
9
VEHICLE INDENTIFICATION NUMBER (VIN)
AND ENGINE SERIAL NUMBER LOCATION
You need to know the VIN and engine serial numbers to get
title documents for the ATV. You also need these numbers
to order parts from your authorized service center or Baja
Motorsports.
The VIN number is stamped on the front of the ATV frame.
The engine serial number is located on the right side of the
engine housing.
Write down the serial numbers here for your future reference:
VIN:
Engine No:
10