Baja motorsports AT250UT, Руководство оператора

Страница: 14 / 64

14 — English
OPERATION

Replace fuel tank cap and turn clockwise to secure.
WARNING:
Check for fuel leaks. A leaking fuel cap is a fire hazard and
must be replaced with an original manufacturer’s replace-
ment cap immediately. If you find any leaks, correct the
problem before using the product. Failure to do so could
result in a fire that could cause serous personal injury.

If it came loose during refuelling, replace the vent tube in
the fuel tank cap. Make sure the other end of the tube is
still installed in the handlebar.
WARNING:
Overfilling the fuel tank could be hazardous. If you overfill
the fuel tank, fuel may overflow when it expands due to
heat from engine or sun. Spilled fuel could catch fire or
explode, resulting in serious personal injury.
WARNING:
Failure to complete the pre-ride inspection and verify
proper performance of the ATV before riding can result
in serious personal injury.
PRE-RIDE INSPECTION
ITEM TO
CHECK
ITEM MUST PERFORM AS
FOLLOWS:
Steering Smoothness; no restriction of move -
ment; no play or looseness.
Brakes Proper brake lever free play; enough
brake force; parking brake effective -
ness.
Tires Proper air pressure; enough tread depth;
no cracks, rips, or other damages.
Fuel Enough fuel for the intended trip.
Fuel cap Fuel vent hose installed properly; no
damage to fuel tank or cap; fuel tank
cap closed securely.
Engine stop
switch
Proper operation of switch. Start engine,
then press stop switch. Engine should
stop.
Engine
lubricant
Proper level; check lubricant by inspect -
ing engine oil dip stick. The engine lu-
bricant should be between the minimum
and maximum lines.
Throttle Proper free play of throttle lever; smooth
response; quick return to idle position.
General
condition
Bolts and nuts are tight; no rattle from
any parts of the engine when running;
no visible evidence of damage including
frame cracks.
STARTING THE ENGINE
WARNING:
Be sure to set the parking brake before you start the en -
gine. The ATV could move unexpectedly as soon as you
start the engine, causing you to lose control of the ATV.

Properly position yourself on the ATV seat.

Set the parking brake.

Turn the fuel valve to the ON position.

Turn the switch key to the ON position.

Set the engine stop switch to the RUN position.

Set the choke lever to the ON position.

Apply the brake lever or foot brake and make sure that
the wheels are in the locked condition.

Press the START button to start the engine. If the battery
is dead, use the pull cord to start the engine.

Allow the engine to warm up, then place the choke lever
in the OFF position.

When you are sure the engine is warm, release the park -
ing brake.

Rel ease the brake lever and open the throttle gradually
to move forward.
WARNING:
Always open the throttle gradually when you want to ac-
celerate. Opening the throttle suddenly could cause the
front wheels to leave the ground and cause loss of control
of the ATV causing serious personal injury.
WARNING:
Always keep both hands on the handlebars and both feet
on the foot rests of your ATV during operation. Removing
even one hand or foot can reduce your ability to control
the ATV or could cause you to lose your balance and fall
off the ATV. If you remove a foot from the foot rest, you
may come in contact with the ATV, ground, obstacles,
etc., which could cause an accident and result in serious
personal injury.