Baja motorsports AT250UT, Руководство оператора

Страница: 20 / 64

20 — English
MAINTENANCE
INSPECTION AND MAINTENANCE SCHEDULE
It is very important to inspect and maintain your ATV regularly. Follow the guidelines in the chart below. The intervals be -
tween periodic services in months are shown. At the end of each interval, be sure to perform and document the maintenance
listed.
Any properly trained and qualified person may maintain the emission control device and systems on your Baja unit. Only a
Baja authorized service center may honor your emission control device and systems limited warranty.
WARNING:
Failing to perform recommended maintenance or performing maintenance improperly can lead to an accident and cause
serious personal injury, cause noncompliance to emissions regulations, and may void your warranty. If you are not sure
how to perform the maintenance items below, contact your Baja authorized service center or Baja Motorsports.
Item Weekly Monthly Quarterly Yearly
Fuel Lines I L I
Air Cleaner (E) C C I I
Throttle Controls I A I A
Spark Plug (E) C I R
Valve Clearance (E) I I I
Engine Lubricant
During running-in period, replace every 150 miles.
After running-in period, replace every 600 miles.
Gearbox Lubricant
Filter Screen of Engine Lubricant
C C I I
Carburetor
(E)
C C C C
Drive Chain I A L
Battery I
Brake Shoe I
Brake System I
Electric Parts I
Bolts, Nuts, Fasteners L I
Gear In Gearbox I I
Fuel Tank I I
Tire Pressure Wear I
Steering System A
Chassis L I
I = Inspect and clean, adjust, lubricate, or replace as necessary (E) = Emissions compliance-related component
C = Clean R = Replace A = Adjust L = Lubricate
CAUTION :
If you operate your ATV under severe conditions, it will need maintenance more often than shown in the chart above.
Severe conditions include operating under frequent full throttle or in dusty, wet, sandy, or muddy areas. If you have
questions regarding appropriate maintenance intervals for your ATV, contact your Baja authorized service center or Baja
Motorsports.