Baileigh VM-936E-1, Руководство оператора

Страница: 36 / 56

33
33
LUBRICATION AND MAINTENANCE

Check daily for any unsafe conditions and fix immediately.

Check that all nuts and bolts are properly tightened.

On a weekly basis clean the machine and the area around it.

Lubricate threaded components and sliding devices.

Apply rust inhibitive lubricant to all non-painted surfaces.
One Shot Way Oiler
The oil lines running from the one
–shot oiler feed lubrication
to the ways of the table, cross slide, and knee (column).

Fill the reservoir as needed, after removing the cap, with
Mobil Vactra Oil #2.

Remove and clean the strainer basket if needed.

To use the oiler, pull the handle once for every hour of
operation and release it to send the lubricant through the
lines.
Leadscrews
Use solvent to clean any debris and grime from the leadscrews, and then wipe them dry.
Brush a thin coat of lubricant on the threads of the leadscrews.
Rotate the leadscrew through its working path to distribute the grease.
Use a NLGI #2 grease or equivalent after every 40 hours of operation.
Note : Proper maintenance can increase the life expectancy of your machine.
WARNING:
Make sure the electrical disconnect is OFF before working on
the machine.
Maintenance should be performed on a regular basis by qualified personnel.
Always follow proper safety precautions when working on or around any machinery.
figure 28
Cap
Strainer
Basket