Baileigh VM-936E-1, Руководство оператора

Страница: 28 / 56

25
25
“Z” Axis:
Each increment of rotation
on the dial equals .001” (.025mm) so
one complete rotation of the dial will
give 0.10” (2.5mm) of linear table
travel on the “Y” axis.
Turret Rotation
The turret rotates 90° to the left and 90° to
the right from the center “0” position as
indicated on the scale.
To rotate the turret:
1. DISCONNECT POWER TO THE MILL.
2. Loosen (4) bolts, two as indicated by the
arrows in (fig. 13) and two on the
opposite side.
3. Manually rotate the turret around the
column to the left or to the right and use
the scale to determine the amount of
rotation.
4. Once the location has been set, re-tighten the four bolt heads before beginning operations.
CAUTION:
Always lock the head firmly in place after making an
adjustment. Unexpected movement of the head during machining operations could
cause the tool to bind with the piece part, resulting in damage to the tool and piece
part, or serious personal injury.
“
0
”
figure 13
0
0
90
10
.001"
.025mm
figure 12