Baileigh VM-936E-1, Руководство оператора

Страница: 31 / 56

28
28
Downfeed Controls
A. Quill Stop ( A , fig. 18) located on the front of
the head and is used in conjunction with the
micrometer adjusting nut for predetermined
depth.
B. Downfeed Stop & Lock Wheels ( B , fig. 18)
Stops the downfeed travel when the quill stop
reaches this point. Set the stop wheel along the
downfeed scale for the desired depth of cut,
then secure it in place by tightening the lock
wheel up to it.
C. Coarse Downfeed Lever ( C , fig. 18) When this
lever is enabled with the downfeed selector, it
raises or lowers the quill quickly. The handle
can be disengaged from rotating by pulling out
as indicated by the arrow.
D. Quill Lock ( D , fig. 18) Locks the quill in place
but does not affect spindle rotation.
E. Fine Downfeed Handwheel ( E , fig. 19) when
enabled, it raises or lowers the quill in small
increments.
F. Downfeed Selector ( F , fig. 19) Enables either the
coarse or fine downfeed control. Tighten the
selector to enable the fine down feed hand wheel,
and loosen it to enable the coarse downfeed lever.
F
E
figure 19
figure 18
A
B
C
D