Baileigh VM-936E-1, Руководство оператора

Страница: 33 / 56

30
30
AUTO TAPPING OPERATION
1. Loosen the retaining nut (A).
2. Adjust the nut (B) up or down along screw (C) to
the desired tapping distance/depth. The distance
from top surface of nut (A) to bottom surface of dog
(D) is the controlling depth of tapping.
3. Lock the retaining nut (A).
4. Turn the switch to TAP position.
5. Press down the RIGHT or LEFT button as
required.
6. When tapping depth reaches the controlling depth,
the turning direction of spindle will be changed
automatically and the taps will be released from
the work piece to finish tapping.
Positioning the Ram
1. The ram can be moved by first loosening the
two adjustable handles as indicated by the
arrows in (fig, 22).
2. Turn the handle clockwise (cw) to move the
ram forward or to the right.
3. Turn the handle counterclockwise (ccw) to
move the ram back or to the left.
Note : It is recommended while
doing heavy milling work that the head be left as
close as possible to the face of the turret to
obtain maximum rigidity.
CAUTION:
Care should be taken to lock ram securely after setting.
Failure to do so could result in damage to the tool and piece part, or serious personal
injury.
figure 22
D
B
A
C
figure 21