BA-440 DualBeam Barcode Reader Quickstart Guide Ver 5
Overhead View
1. Determine where to place the BA-440 DualBeam
As shown in the figure above, the reader should be located about 1.5 car lengths (25’) before the gate. It does not matter which side of the
road it is mounted on, as long as the vehicle decals are on the same side.
Always place the reader and decals on the same side of the
car
.
Typical Installation Position
Mounting Angle (overhead view)
25’ or Approx
1.5 car lengths
BA-440 DualBeam
Passenger side install
BA-440 DualBeam
Drivers’ side install
The BA-440 DualBeam
should be aimed straight
across the road as shown.
Curb
Car Window
BA-440
