2
www.stairslight.com
one or both of the sensors, until the end of the animation program, to prevent re-lighting the stairs
while going down. It is also possible to preset a longer time to start up the controller, so that it does
not react to transient states after power is turned on. At any time, factory settings can be restored.
Specifications
Maximum number of illuminated stairs — 23
Number of illuminated handrails — 2
Supply voltage — 12V
Dimensions: length — 11cm, width — 9cm, height — 7 cm
Mounting on T-35 rail — the width of 6 modules.
Output capacity — up to 5A per one output
Running — by short-to-ground (negative power supply)
Functions buttons and control LED
Description of buttons on the body:
UP
– button starts the animation towards the top
DN
– button starts the animation towards the bottom
MID
– button starts the animation from the platform
LGT
– button switch on/off continuous light
OPT
– button for additional options (not used)
LED
– LED indicator
SET
– setup button
RES
– reset button
