BADU JET Smart, Перевод оригинального руководства по эксплуатации

Страница: 64 / 316

Safety
10 EN 06|2020
– The personnel have read this manual and understand the
necessary working steps.
2.3 Safety regulations
The operator of the system is responsible for the adherence to all
relevant statutory regulations and guidelines.

Observe the following regulations when using the pump/unit:
– This manual
– Warning and information signs on the product
– Other applicable documents
– The valid national regulations for accident prevention
– The internal occupational, operational and safety
regulations of the operator
2.4 Protective equipment
Reaching into moving parts, e.g. coupling and/or impeller fan, can
cause serious injury.

Never operate the pump/unit without protective covers.
2.5 Structural modifications and spare parts
Alterations or modifications can affect operational safety.

Never modify or alter the pump/unit without the
manufacturer's permission.

Only use original spare parts and accessories authorised by
the manufacturer.
2.6 Signs

Ensure that all the signs on the complete pump/unit remain
legible.
2.7 Residual risk
2.7.1 Falling parts
The lifting hooks on the motor are designed for the weight of the
motor. The lifting hooks can break if the complete pump unit is
attached.
 The pump unit, consisting of the motor and the pump, should
be attached on both the motor and pump sides. see "Fig. 2"
on page 16 .
 Only use hoisting and load-bearing equipment which is
suitable and technically sound.
 Do not stand under suspended loads.