BADU Eco Logic, Инструкция по установке и эксплуатации

Страница: 21 / 35

21
Special functions
The menu “7. Special functions” is used to
set basic items and expand functions.
The menu is closed by pressing the “esc”
key or selecting “Exit special functions”.
7. Special functions
Other than the time, all settings
may only be made by a specialist.
7.1. --
This menu is used to set the current time and date.
7.2. Time and date
For analysis of the system data it is essential that the time is set accu-
rately on the controller. Please note that the clock has a 24 hour battery
reserve if the mains voltage is interrupted and must therefore be reset
afterwards.
7.3. --
Starting the commissioning help guides you through the basic settings necessary for
commissioning in the correct order and provides brief descriptions of each parameter
in the display.
Pressing the “esc” key takes you back to the previous value so you can look at the se-
lected setting again or adjust it if desired. Pressing the “esc” key more than once takes
you back to the selection mode, thus cancelling the commissioning help. (See also
“E.2. Commissioning help” on page 13).
7.4. Commissioning
May only be started by a specialist during commissioning! Observe
the explanations for the individual parameters in these instructions and
check whether further settings are necessary for your application.
All of the settings that have been made can be reset, thus returning the controller to its
delivery state.
7.5. Factory settings
The entire parametrisation, analyses etc. of the controller will be lost
irrevocably. The controller must then be commissioned once again.
7.6. --