BADU Eco Logic, Инструкция по установке и эксплуатации

Страница: 13 / 35

13
E.2. Commissioning help
E.3. Free commissioning
If you decide not to use the commissioning help, you should make the necessary set-
tings in the following sequence:
- Menu 10. Language
- Menu 7.2. Time and date
- Menu 5. Settings, all values
- Menu 6. Protective functions, if necessary
- Menu 7. Special functions, if necessary
Finally, the menu “4.2. Manual” on page 18 should be used to test the switch outputs
with the consumers connected and to check the sensor values for plausibility. Then
the automatic mode can be switched on.
display. Pressing the “esc” key takes you back to the previous value so you can look at
the selected setting again or adjust it if desired. Pressing the “esc” key more than once
takes you back step by step to the selection mode, thus cancelling the commissioning
help. Finally, the menu “4.2. Manual” on page 18 should be used to test the switch
outputs with the consumers connected and to check the sensor values for plausibility.
Then the automatic mode can be switched on.Automatikbetrieb einzuschalten.
The fi rst time the controller is turned on
and after the language and time are set,
a query appears as to whether you want
to param-etrise the controller using the
commissioning help or not. The commis-
sioning help can also be terminated or
called up again at any time in the special
functions menu. The commissioning help
guides you through the necessary basic
settings in the correct order, and provides
brief descriptions of each parameter in the
Commission
Observe the explanations for the individual parameters on the following
pages and check whether further settings are necessary for your appli-
cation.
Observe the explanations for the individual parameters on the following
pages and check whether further settings are necessary for your
application.