BADU Eco Logic, Инструкция по установке и эксплуатации, Страница: 16 / 35

16
The menu “3. Display mode” is used to
defi ne the controller’s display for normal
operation.
This display appears whenever two min
utes go by without any key being pressed.
The main menu appears again when a
key is pressed.
The menu is closed by pressing the “esc”
key or selecting “Exit display mode”.
Display mode
3. Display mode
3.1. Schematic
In graphics mode, the selected hydraulic systems are depicted with operating states of
the connected consumers.
3.2. Overview
In overview mode, the operating states of the connected consumers are depicted in text form.
3.3. Alternating
3.4. Sleep mode
In alternating mode the schematic mode and then the overview mode are active for 5
seconds at a time.
When active, the display’s backlight is switched off after 2 minutes of inactivity.
If an error message is waiting, the backlight is not switched off .