Page 8
For technical questions, please call 1-888-866-5797.
Item 61876
SAFET
y
Op
ERA
TION
MAINTENANCE
SETU
p
Attaching the Hand Crank
1. Attach the Hand Crank (18) only
when manually rewinding.
CAUTION!
Do not operate the Winch electrically when
the Hand Crank is installed. Do not use the Hand Crank
to assist the Winch when it is electrically powered. This
will damage the Winch and may cause personal injury.
2. To attach the Hand Crank, tighten the clutch first
by turning the Clutch Knob (19) clockwise until
hand tight. Remove the outer Lock Nut and
slide the Hand Crank over the threaded shaft up
against the inner Lock Nut. Secure Hand Crank
in place with the outer Lock Nut. See Figure C.
Hand Crank
Clutch Knob
Outer Lock Nut
Inner Lock Nut
Figure C: Hand Crank Attachment
Operation Instructions
Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
The instructions that follow are basic guidelines only and cannot cover all situations encountered
during use. The operator and assistants must carefully plan usage to prevent accidents.
TO pREVENT SERIOUS INJURy: Operation of a winch involves more than depressing
the power switch. The use of winches is subject to certain hazards that cannot be met
by mechanical means, but only by the exercise of intelligence, care, common sense, and
experience in anticipating the motions that will occur as a result of operating the controls.
Do not use this tool for vertical lifting.
Before Operating Winch
1. Familiarize yourself with all operating controls of the
Winch and with the operation(s) to be performed.
Instructions include the warnings on the Winch
and the safety and operating instructions
portion of this manual.
2.
WARNING! TO pREVENT SERIOUS INJURy
FROM WINCH FAILURE:
Do not use damaged equipment.
If adjustments or repairs are necessary,
or any defects are known, have the
problem corrected before further use.
Содержание 61876
Страница 1: ......
