background image

Page 2

For technical questions, please call 1-888-866-5797.

Item 61876 

        

SAFET

y

Op
ERA
TION

MAINTENANCE

SETU

p

Table of Contents

Safety ......................................................... 2
Setup .......................................................... 6
Operation .................................................... 8

Maintenance .............................................. 12
Parts List and Diagram .............................. 14
Warranty .................................................... 16

WARNING SyMBOLS AND DEFINITIONS

This is the safety alert symbol.  It is used to alert you to potential 

personal injury hazards.  Obey all safety messages that 

follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,  

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in minor or moderate injury.

Addresses practices not related to personal injury.

Symbol

property or Statement

Wear heavy-duty, cut- and 

abrasion

-

resistant leather gloves.

Wear ANSI-approved safety glasses.

Cut or sever hazard.

Roller entanglement hazard.

Hot surface burn hazard.

Fire hazard.

Caustic chemical (acid) hazard.

Explosion hazard.

Do not loop the wire rope around 

object and hook onto itself.

Symbol

property or Statement

Do not place finger(s) through hook.  

Fingers may be caught and 

get pulled into drum.

pull hook using strap only.

Do not use winch in 

underwind orientation. (Wire rope 

enters/exits at the bottom.)

Use winch only in  

overwind orientation. (Wire rope 

enters/exits at the top.)

VDC

Volts Direct Current

A

Amperes

fpm

Feet Per Minute

Ip

International Protection rating.

Classifies the degrees of 

protection provided against the 

intrusion of solid objects, dust, 

accidental contact, and water.

Содержание 61876

















Отзывы: