Installation
Page 5/43
UF_iS4000_BA_02_1811
Installation
Installation instructions given in the following are to be observed in order
to guarantee a perfect functioning and a safe operation of the meter.
Installation with the sensor EchoPod DL-10
Installation of the sensor:
Screw the sensor into the stainless steel mounting bracket while using the
gaskets.
Sensor must be installed maximum 125 cm above the flume bottom (minimal
measured level) with a minimum of 5 cm distance above the maximal
measured level.
EchoPod DL-10 connection to the 4-20 mA input terminal (on the bottom side of
display board
):
Viton Gasket
Sensor EchoPod
Max
125 cm
Min
5 cm