Bad Boy Outlaw 6100, Руководство владельца, обслуживания и запасных частей

Страница: 51 / 80

The deck spring tension is critical. If the tension
is too high, premature failure of the deck belt
and blade spindles can occur. If the tension is
too low, the belt can ‘jump off’ or slip on the
pulleys. This results in reduced cut quality and
early belt failure.
Spring tension adjustments can be made by
sliding the bolt shown above forward or
backward in the slot of the deck. Belt tension
should be 70-75 lbs. for a 54” deck and 75-80
lbs. for a 61” and 72” deck, with the deck at its
lowest setting.
Use a belt tension gauge to ensure the
proper tension. Your dealer or service center
will have a belt tension gauge or you can buy
one (Part Number 041-9999-00).
Blade Sharpening:
The blade on the top (see photo) was utilized
long after replacement was required. In
addition to a decline in cut quality, failure to
replace a worn or damaged blade creates a
major safety hazard. Bad Boy recommends
that blade sharpening be performed by a
professional.
PAGE
5 1