Bad Boy Outlaw 6100, Руководство владельца, обслуживания и запасных частей, Страница: 20 / 80

Purging Procedure
Due to the effects air has on the efficiency in
hydrostatic drive applications, it is critical that
the air is purged from the system. These
purge procedures should be implemented
any time a hydrostatic system has been
opened to facilitate maintenance or any
additional oil has been added to the system.
1)
Lift the rear tires of the mower off of
the ground and chock your front tires
so they do no move.
2)
With the bypass valve open and the engine
running, slowly move the directional drive
arms in the
forward and reverse directions (5
to 6 times), as air is purged from the unit, the
oil level will drop.
3)
With the bypass valve closed and the engine
running, slowly move the directional drive
arms in
the forward and reverse directions (5
to 6 times). Check the oil level, and add oil
as required after
stopping the engine.
4)
It may be necessary to repeat steps 1 and 2
until all the air is completely purged from the
system.
When the transaxle moves forward
and reverse at normal speed purging is
complete.
Outlaw Extreme transaxles hold 4.75 quarts each.
Bad Boy Hydrostatic Oil is recommended. Transaxle
service is recommended after the first 75 hours of use;
then at intervals of 250 usage hours. Use only Hydro-
Gear ® brand oil filters. Use of other brands could void
the warranty.
PAGE 20