Bad Boy Outlaw 6100, Руководство владельца, обслуживания и запасных частей

Страница: 26 / 80

3.4 Changing the spark plugs and checking the
spark plug gap:
1) Remove the wire on the spark plug and use a 5/8”
socket to remove the spark plug.
2) Check the gap on the spark plug to verify that it is 0.03
in using a feeler gauge.
3) If the spark plug is worn, overheated, wet or carbon
fouled replace the spark plug.
4) Install the plug into cylinder head and torque to 20
ft.*lbs. Be careful not to overtighten the spark plug.
PAGE 26