Bad Boy Outlaw 6100, Руководство владельца, обслуживания и запасных частей

Страница: 50 / 80

PAGE
50
1)
Start on a flat level surface and set
the air pressure in all four tires to 12
psi.
2)
Get 2 2x4s and make sure that the wider
sides are similar length.
3)
Take off the foot pedal and raise the floor
plate.
4)
Lower the deck onto the 2x4s and
pin the deck into its top available height.
Remove the dampener that attaches to
the actuator bar using two ½” wrenches.
5)
Now ensure that the deck is level left to
right and has a pitch down of ¼” from the
back to the front. This can be done by
adjusting the tabs on the deck.
6)
Loosen the bolts on the back of the deck
using two ¾” wrenches until the deck
hanger is resting against the bolt.
7)
Adjust the front deck hanger until there is
¼” gap between the deck hanger and the
bolt that it rests on.
8)
Reattach the dampener to the actuator
bar.
9) Place the floorplate down and place the
foot pedal back on and you should be
ready to mow.