Bad Boy Outlaw 6100, Руководство владельца, обслуживания и запасных частей

Страница: 40 / 80

3.4 Changing the spark plugs and checking the spark
plug gap:
1) Remove the wire on the spark plug and use a
13/16” socket to remove the spark plug.
2) Check the gap on the spark plug to verify that
it is 0.03 in using a feeler gauge.
3) If the spark plug is worn, overheated, wet or
carbon fouled replace the spark plug.
4) Install the plug into cylinder head and torque
to 16 ft.*lbs. Be careful not to overtighten
the spark plug.
PAGE
40