Backyard Products GABLE 10 x 12, Руководство пользователя

Страница: 19 / 66

75
PARTS REQUIRED:
ROOF PANELS
Fig. E
Fig. F
Move up to the top of the roof and ensure accurate spacing between the centers of the rafters (Fig. E) .
Use a gauge block to ensure the panel measures 3/4" (1,9 cm) along the length of the rafter.
Secure panel with (5) 2" nails, (1) into each rafter
(Fig. E) .
7
Measure
from
outside
of gable
24-3/4"
(62,9) cm)
24"
(61) cm)
24"
(61) cm)
24"
(61) cm)
24"
(61) cm)
3/4"
(1,9 cm)
Gauge
Block
Move the gable unit to make panel flush with outer gable frame edge (Fig. F) .
2"
(5,1 cm)
Nails
8 Install the next 32-5/8" x 75-1/4" roof panel as shown.
Panel should be flush with eave frame (Fig. B) and flush to installed panel.
Secure panel with (1) nail in each inner corner
Flush
Flush
Flush
48 x 96"
Secure with (1) 2" nail in each corner.
7/16 x 32-5/8 x 75-1/4"
(1,1 x 82,9 x 191,1 cm)
x1
32-5/8 x 75-1/4"
Fig. B
Flush with
eave frame
Flush
1 Nail in reach corner
Nail this side first.